本文已有最新版本:

  请点击Nginx 0.8.x + PHP 5.2.13(FastCGI)搭建胜过Apache十倍的Web服务器(第6版)




  [文章作者:张宴 本文版本:v4.14 最后修改:2009.04.14 转载请注明原文链接:http://blog.zyan.cc/nginx_php_v4/]

  前言:本文是我撰写的关于搭建“Nginx + PHP(FastCGI)”Web服务器的第4篇文章。本系列文章作为国内最早详细介绍 Nginx + PHP 安装、配置、使用的资料之一,为推动 Nginx 在国内的发展产生了积极的作用。这是一篇关于Nginx 0.7.x系列版本的文章,安装、配置方式与第3篇文章相差不大,但配置参数有不同。Nginx 0.7.x系列版本虽然为开发版,但在很多大型网站的生产环境中已经使用。

  链接:《2007年9月的第1版》、《2007年12月的第2版》、《2008年6月的第3版

  点击在新窗口中浏览此图片

  Nginx ("engine x") 是一个高性能的 HTTP 和反向代理服务器,也是一个 IMAP/POP3/SMTP 代理服务器。 Nginx 是由 Igor Sysoev 为俄罗斯访问量第二的 Rambler.ru 站点开发的,它已经在该站点运行超过两年半了。Igor 将源代码以类BSD许可证的形式发布。

  Nginx 超越 Apache 的高性能和稳定性,使得国内使用 Nginx 作为 Web 服务器的网站也越来越多,其中包括新浪博客新浪播客网易新闻等门户网站频道,六间房56.com等视频分享网站,Discuz!官方论坛水木社区等知名论坛,豆瓣YUPOO相册海内SNS迅雷在线等新兴Web 2.0网站。



  Nginx 的官方中文维基:http://wiki.codemongers.com/NginxChs



  在高并发连接的情况下,Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。根据我的测试结果,Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 可以承受3万以上的并发连接数,相当于同等环境下Apache的10倍

  根据我的经验,4GB内存的服务器+Apache(prefork模式)一般只能处理3000个并发连接,因为它们将占用3GB以上的内存,还得为系统预留1GB的内存。我曾经就有两台Apache服务器,因为在配置文件中设置的MaxClients为4000,当Apache并发连接数达到3800时,导致服务器内存和Swap空间用满而崩溃。

  而这台 Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器在3万并发连接下,开启的10个Nginx进程消耗150M内存(15M*10=150M),开启的64个php-cgi进程消耗1280M内存(20M*64=1280M),加上系统自身消耗的内存,总共消耗不到2GB内存。如果服务器内存较小,完全可以只开启25个php-cgi进程,这样php-cgi消耗的总内存数才500M。

  在3万并发连接下,访问Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器的PHP程序,仍然速度飞快。下图为Nginx的状态监控页面,显示的活动连接数为28457(关于Nginx的监控页配置,会在本文接下来所给出的Nginx配置文件中写明):

  点击在新窗口中浏览此图片

  我生产环境下的两台Nginx + PHP5(FastCGI)服务器,跑多个一般复杂的纯PHP动态程序,单台Nginx + PHP5(FastCGI)服务器跑PHP动态程序的处理能力已经超过“700次请求/秒”,相当于每天可以承受6000万(700*60*60*24=60480000)的访问量(更多信息见此),而服务器的系统负载也不高:

  点击在新窗口中浏览此图片



  安装步骤:
  (系统要求:Linux 2.6+ 内核,本文中的Linux操作系统为CentOS 5.1,另在RedHat AS4上也安装成功)

  一、获取相关开源程序:
  1、【适用CentOS操作系统】利用CentOS Linux系统自带的yum命令安装、升级所需的程序库(RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包,进行安装):
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers


  2、【适用RedHat操作系统】RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包(事先可通过类似“rpm -qa | grep libjpeg”的命令查看所需的RPM包是否存在,通常是“xxx-devel”不存在,需要安装)。RedHat可以直接利用CentOS的RPM包安装,以下是RPM包下载网址:
  ①、RedHat AS4 & CentOS 4
  http://mirror.be10.com/centos/4/os/i386/CentOS/RPMS/
  http://mirror.be10.com/centos/4/os/x86_64/CentOS/RPMS/

  ②、RedHat AS5 & CentOS 5
  http://mirror.be10.com/centos/5/os/i386/CentOS/
  http://mirror.be10.com/centos/5/os/x86_64/CentOS/

  ③、RPM包搜索网站
  http://rpm.pbone.net/
  http://www.rpmfind.net/

  ④、RedHat AS4 系统环境,通常情况下缺少的支持包安装:
  Ⅰ、i386 系统

  Ⅱ、x86_64 系统


  3、【适用CentOS、RedHat及其它Linux操作系统】下载程序源码包:
  本文中提到的所有开源软件为截止到2009年04月14日的最新稳定版。
  ①、从软件的官方网站下载:
mkdir -p /data0/software
cd /data0/software
wget http://sysoev.ru/nginx/nginx-0.7.51.tar.gz
wget http://www.php.net/get/php-5.2.8.tar.gz/from/this/mirror
wget http://php-fpm.anight.org/downloads/head/php-5.2.8-fpm-0.5.10.diff.gz
wget http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.33.zip/from/http://mysql.mirror.redwire.net/
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.5.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-7.8.tar.gz
wget http://bart.eaccelerator.net/source/0.9.5.3/eaccelerator-0.9.5.3.tar.bz2
wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://pecl.php.net/get/imagick-2.2.2.tgz

  ②、从blog.zyan.cc下载(比较稳定,只允许在本站,或者在Linux/Unix下通过Wget、Curl等命令下载以下软件):
mkdir -p /data0/software
cd /data0/software
wget http://blog.zyan.cc/soft/linux/nginx_php/nginx/nginx-0.7.51.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/php/php-5.2.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/phpfpm/php-5.2.8-fpm-0.5.10.diff.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mysql/mysql-5.1.33.zip
wget http://blog.zyan.cc/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/pcre/pcre-7.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.5.3.tar.bz2
wget http://blog.zyan.cc/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/imagick-2.2.2.tgz



  二、安装PHP 5.2.8(FastCGI模式)
  1、编译安装PHP 5.2.8所需的支持库:
tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../



  2、编译安装MySQL 5.1.33
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
unzip mysql-5.1.33.zip
cd mysql-5.1.33/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
cd ../



  附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下两步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。
  ①、以mysql用户帐号的身份建立数据表:
/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=mysql


  ②、启动MySQL(最后的&表示在后台运行)
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &



  3、编译安装PHP(FastCGI模式)
tar zxvf php-5.2.8.tar.gz
gzip -cd php-5.2.8-fpm-0.5.10.diff.gz | patch -d php-5.2.8 -p1
cd php-5.2.8/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../



  4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../


  5、修改php.ini文件
  手工修改:查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
  修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
  并在此行后增加以下几行,然后保存:
  extension = "memcache.so"
  extension = "pdo_mysql.so"
  extension = "imagick.so"

  再查找output_buffering = Off
  修改为output_buffering = On

  自动修改:若嫌手工修改麻烦,可执行以下shell命令,自动完成对php.ini文件的修改:
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini


  6、配置eAccelerator加速PHP:
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini

  按shift+g键跳到配置文件的最末尾,加上以下配置信息:
引用
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"


  修改配置文件:
vi /etc/sysctl.conf

  输入以下内容:
引用
kernel.shmmax = 134217728

  然后执行以下命令使配置生效:
/sbin/sysctl -p



  7、创建www用户和组,以及供blog.zyan.cc和www.zyan.cc两个虚拟主机使用的目录:
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www


  8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):
  在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf

  输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的<value name="display_errors">0</value>改为<value name="display_errors">1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页):  9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程),用户为www:
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start

  注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload。



  三、安装Nginx 0.7.51
  1、安装Nginx所需的pcre库:
tar zxvf pcre-7.8.tar.gz
cd pcre-7.8/
./configure
make && make install
cd ../


  2、安装Nginx
tar zxvf nginx-0.7.51.tar.gz
cd nginx-0.7.51/
./configure --user=www --group=www --prefix=/usr/local/webserver/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
cd ../


  3、创建Nginx日志目录
mkdir -p /data1/logs
chmod +w /data1/logs
chown -R www:www /data1/logs


  4、创建Nginx配置文件
  ①、在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件:
rm -f /usr/local/webserver/nginx/conf/nginx.conf
vi /usr/local/webserver/nginx/conf/nginx.conf

  输入以下内容:
引用
user  www www;

worker_processes 8;

error_log  /data1/logs/nginx_error.log  crit;

pid        /usr/local/webserver/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;

events
{
  use epoll;
  worker_connections 51200;
}

http
{
  include       mime.types;
  default_type  application/octet-stream;

  #charset  gb2312;
      
  server_names_hash_bucket_size 128;
  client_header_buffer_size 32k;
  large_client_header_buffers 4 32k;
  client_max_body_size 8m;
      
  sendfile on;
  tcp_nopush     on;

  keepalive_timeout 60;

  tcp_nodelay on;

  fastcgi_connect_timeout 300;
  fastcgi_send_timeout 300;
  fastcgi_read_timeout 300;
  fastcgi_buffer_size 64k;
  fastcgi_buffers 4 64k;
  fastcgi_busy_buffers_size 128k;
  fastcgi_temp_file_write_size 128k;

  gzip on;
  gzip_min_length  1k;
  gzip_buffers     4 16k;
  gzip_http_version 1.0;
  gzip_comp_level 2;
  gzip_types       text/plain application/x-javascript text/css application/xml;
  gzip_vary on;

  #limit_zone  crawler  $binary_remote_addr  10m;

  server
  {
    listen       80;
    server_name  blog.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/blog;

    #limit_conn   crawler  20;    
                            
    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }
    
    location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
    {
      expires      30d;
    }

    location ~ .*\.(js|css)?$
    {
      expires      1h;
    }    

    log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '
              '$status $body_bytes_sent "$http_referer" '
              '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/access.log  access;
      }

  server
  {
    listen       80;
    server_name  www.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/www;

    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }

    log_format  wwwlogs  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/wwwlogs.log  wwwlogs;
  }

  server
  {
    listen  80;
    server_name  status.blog.zyan.cc;

    location / {
    stub_status on;
    access_log   off;
    }
  }
}


  ②、在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件:
vi /usr/local/webserver/nginx/conf/fcgi.conf

  输入以下内容:
引用
fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;


  5、启动Nginx
ulimit -SHn 51200
/usr/local/webserver/nginx/sbin/nginx



  四、配置开机自动启动Nginx + PHP
vi /etc/rc.local

  在末尾增加以下内容:
引用
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx



  五、优化Linux内核参数
vi /etc/sysctl.conf

  在末尾增加以下内容:
引用
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000    65000


  使配置立即生效:
/sbin/sysctl -p



  六、在不停止Nginx服务的情况下平滑变更Nginx配置
  1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:
/usr/local/webserver/nginx/sbin/nginx -t

  如果屏幕显示以下两行信息,说明配置文件正确:
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully


  2、这时,输入以下命令查看Nginx主进程号:
ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'

  屏幕显示的即为Nginx主进程号,例如:
  6302
  这时,执行以下命令即可使修改过的Nginx配置文件生效:
kill -HUP 6302

  或者无需这么麻烦,找到Nginx的Pid文件:
kill -HUP `cat /usr/local/webserver/nginx/nginx.pid`



  七、编写每天定时切割Nginx日志的脚本
  1、创建脚本/usr/local/webserver/nginx/sbin/cut_nginx_log.sh
vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh

  输入以下内容:
引用
#!/bin/bash
# This script run at 00:00

# The Nginx logs path
logs_path="/usr/local/webserver/nginx/logs/"

mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`


  2、设置crontab,每天凌晨00:00切割nginx访问日志
crontab -e

  输入以下内容:
引用
00 00 * * * /bin/bash  /usr/local/webserver/nginx/sbin/cut_nginx_log.sh




  本文若有小的修改,会第一时间在以下网址发布:
  http://blog.zyan.cc/post/366.htm



  附:文章修改历史

  ● [2008年08月29日] [Version 4.0] 撰写本文

  ● [2008年09月03日] [Version 4.1] 修改了nginx.conf文件有关gzip压缩的项,“gzip_http_version 1.1;”改为“gzip_http_version 1.0;”,增加一项“gzip_vary on;”,目的是为了让Nginx前端的Squid 2.5/2.6缓存服务器能够缓存经过gzip压缩的页面。另外,将nginx版本由0.7.13升级到最新的0.7.14。

  ● [2008年10月06日] [Version 4.2] 增加第七章──“编写每天定时切割Nginx日志的脚本”;升级Nginx版本到0.7.17;升级PHP FastCGI补丁到php-5.2.6-fpm-0.5.9.diff.gz;修改php-fpm.conf配置文件。

  ● [2008年10月26日] [Version 4.3] 升级Nginx版本到0.7.19。

  ● [2008年11月02日] [Version 4.4] 升级MySQL版本到5.1.29-rc。对文中涉及到的开源软件增加blog.zyan.cc下载点。

  ● [2008年11月11日] [Version 4.5] MySQL编译参数加上对InnoDB存储引擎的支持。

  ● [2008年11月14日] [Version 4.6] 解决在某些64位CentOS系统上,编译PHP时出现的libcrypto和libcurl无法找到的错误;升级Nginx版本到0.7.21。

  ● [2008年11月24日] [Version 4.7] 为PHP增加PDO_MYSQL扩展支持;升级PHP的Memcache扩展到2.2.4版本;升级PCRE版本到0.7.8;升级Nginx版本到0.7.22。

  ● [2008年12月12日] [Version 4.8] 升级Nginx版本到0.7.26;升级MySQL版本到5.1.30。

  ● [2008年12月17日] [Version 4.9] 编译PHP时的“sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile”和“make”两条语句改为“make ZEND_EXTRA_LIBS='-liconv'”;升级Nginx版本到0.7.27;升级PHP版本到5.2.8;升级PHP FastCGI补丁到php-5.2.8-fpm-0.5.10.diff.gz。

  ● [2008年12月23日] [Version 4.10] 编译PHP时增加此三项支持:--with-mhash --enable-pcntl --enable-sockets

  ● [2009年01月15日] [Version 4.11] 升级Nginx版本到0.7.30

  ● [2009年01月17日] [Version 4.12] 增加 RedHat AS4 系统环境通常情况下缺少的支持包安装。

  ● [2009年04月02日] [Version 4.13] 升级Nginx版本到0.7.47;升级MySQL版本到5.1.33;升级PHP的Memcache扩展到2.2.5版本;升级libiconv版本到1.13;升级mcrypt版本到2.6.8;升级mhash版本到0.9.9.9;。

  ● [2009年04月14日] [Version 4.13] 升级Nginx版本到0.7.51;为PHP增加ldap支持;为PHP增加ImageMagick支持。

  (全文完)




技术大类 » Web服务器 | 评论(330) | 引用(0) | 阅读(665812)
神仙 Email Homepage
2011-4-19 11:39
学习了,我的环境就是这样配置的
wkadmin Email
2011-5-8 14:08
我做的nginx+openssl+crl 配置没一点错误但是我吊销证书时老是不成功

我做的nginx+openssl+crl 配置没一点错误但是我吊销证书时老是不成功

我做的nginx+openssl+crl 配置没一点错误但是我吊销证书时老是不成功

我做的nginx+openssl+crl 配置没一点错误但是我吊销证书时老是不成功

能不能给点这方面的全部配置
hidcx Email
2011-5-12 15:02
张老师,我有一个疑问,您举得lnmp配置是针对一个网站实例情况的,如果我主机上面有500个站点(即500个虚拟主机),如果我想每一个站点的实例运行时候,使用的进程属主都不同,怎么配置,类似于apache里面是suexec user1 user1.盼望给予解答下。谢谢
cybrobin
2011-5-21 11:20
张老师,你好    我想问下nginx泛域名绑定如何处理?    比如你例子中的 www.s135.com 和  blog.s135.com 所存放的目录:    www.s135.com 是放在 /data0/htdocs/www    blog.s135.com  是放在 /data0/htdocs/blog    如果我想把  blog.s135.com 绑定在  /data0/htdocs/www/blog 目录下,要怎么实现    能不能提供多个方法
linuxinge
2011-6-8 10:23
nginx  如何支持 ssi 相对路径
test
2011-6-13 16:09
求教,我是在windows server上架设的Nginx + php-cgi,由于特殊需求,php-cgi会执行很长时间才返回结果,通常会超过1分钟以上
但是会报错:the page you are looking for is temporarily unavailable. please try again later

官方文档说是php-cgi关闭
我该怎么解决啊
luguo Email Homepage
2011-6-18 09:08
师傅:我安装的nginx php mysql

服务器运行一段时间就php-cgi占用cpu太高,搞的动态页面打不开,服务器cpu到100%,,
重启后能维持一段时间,然后继续上升,请问怎么回事,

师傅救我!!
top - 09:05:06 up 22:52,  1 user,  load average: 5.19, 5.34, 5.68
Tasks: 140 total,   7 running, 131 sleeping,   0 stopped,   2 zombie
Cpu(s): 90.1%us,  1.3%sy,  0.0%ni,  0.0%id,  0.0%wa,  0.9%hi,  7.8%si,  0.0%st
Mem:    515308k total,   482620k used,    32688k free,    17436k buffers
Swap:  2097144k total,    57796k used,  2039348k free,   156384k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
19089 nobody    25   0 60508  10m 6800 R 16.4  2.1  92:34.35 php-cgi            
19387 nobody    25   0 61120  12m 6948 R 16.4  2.5  92:27.22 php-cgi            
19378 nobody    25   0 57424 4720 2688 R 14.7  0.9  92:39.36 php-cgi            
18409 nobody    25   0 61224 9376 8376 R 13.7  1.8  92:30.26 php-cgi            
18127 nobody    25   0 61036  12m 8292 R 13.1  2.5  93:26.05 php-cgi            
1926 root      18   0  1976  664  580 S  1.3  0.1   9:11.32 hald-addon-stor    
27554 nginx     15   0 21032 4308  968 S  0.7  0.8   0:00.64 nginx              
  137 root      15   0     0    0    0 S  0.3  0.0   0:03.23 pdflush
61show Email Homepage
2011-7-14 16:20
这个先收藏起来,等有一天把我的也改成Nginx。
ruijf
2011-9-7 16:30
张大师:能不能解释下$request_time和$upstream_response_time的区别啊?我的nginx版本是0.8.54
我查网上资料说$request_time是响应时间,而《实战Nginx》上说是处理请求前的时间消耗。我在日志里同时打印$request_time和$upstream_response_time,两个时间是一样。

log_format myformat '$remote_addr|$time_local|$msec|$upstream_response_time|$http_referer|$args|$request_time';

58.210.76.18|07/Sep/2011:15:27:55 +0800|1315380475.185|0.020|-|-|0.020
123.125.71.36|07/Sep/2011:15:29:38 +0800|1315380578.084|0.002|-|-|0.002
220.181.108.78|07/Sep/2011:15:30:04 +0800|1315380604.173|0.001|-|-|0.001
58.210.76.18|07/Sep/2011:15:33:00 +0800|1315380780.991|0.021|-|-|0.021
58.210.76.18|07/Sep/2011:15:33:03 +0800|1315380783.780|0.021|-|-|0.021
58.210.76.18|07/Sep/2011:15:33:52 +0800|1315380832.364|0.021|-|-|0.021
125.76.231.38|07/Sep/2011:15:37:17 +0800|1315381037.519|0.002|-|-|0.002
60.215.129.75|07/Sep/2011:15:37:20 +0800|1315381040.729|0.002|-|-|0.002
220.181.108.177|07/Sep/2011:15:44:56 +0800|1315381496.252|0.002|-|-|0.002
58.210.76.18|07/Sep/2011:15:50:29 +0800|1315381829.180|0.020|-|-|0.020
ruijf
2011-9-7 21:24
发现不一样的了,发了个图片上传的请求,
114.217.198.79|07/Sep/2011:21:14:00 +0800|POST /upload/upload/ HTTP/1.1|0.061|-|-|0.879
现在新的疑问是$request_time包含$upstream_response_time了吗?
zshuai
2011-9-11 19:39
张老师我编译php的时候老是碰到这样的问题请问该怎么解决啊

ext/mhash/mhash.o: In function `zif_mhash':
/root/php-5.2.14/ext/mhash/mhash.c:186: undefined reference to `mhash_free'
collect2: ld returned 1 exit status
make: *** [sapi/cgi/php-cgi] Error 1
louis vuitton uk Email Homepage
2011-11-22 17:11
This louis vuitton uk for sale belongs to the sounding just what are termed as Louis Vuitton vintage best sellers, many other products and services for the reason that range appearing companies.You will easily notice the unfold zippers of this coach outlet store online. That is the decoration. There are some inside pockets for you as well. They are easy to match your clothes and to carry.Let us inspire your inner beauty with fine christian louboutin sale. Purse the elegance in bridal wedding. Enjoy the fashion.
armani watches Email Homepage
2011-11-23 10:13
If you are looking for armani Bags, our armani watches Handbags Canada outlet store is your first choice. We promise Original Packing and Best Discount,3-5 Workdays To Your Door!If you buy bags and purses of the latest new designs from the louis vuitton outlet now, you can enjoy special discounts. What else are you waiting for?After you choose the right kind of plants and the size pot for the plant.
bj
2012-1-5 23:52
blog写的很好,加油啊
yiiycc Email Homepage
2012-2-14 00:05
学习了
111
2012-3-5 14:58
呵呵,领教了,没我牛,应该再深入点
牛儿吃草
2012-3-17 10:55
安装成功,很感谢!
Hogan
2012-5-10 18:14
Mentre youre gestione di problemi complessi tra cui PAYE insieme con le imprese del prelievo, l'idea è sicuramente intelligente per acquisire specializzata fare qualcosa di sicuro si sta usando la vostra organizzazione. Self-employmentSelf lavoratori uomini e donne potrebbe anche fare pieno uso Hogan dei ragionieri in tutta Stansted, quando hanno l'effetto della loro prelievo unico e sì, è spesso sconcertante. Stare di fronte a una buona varietà prelievo può essere schiacciante, di conseguenza, il
分页: 15/17 第一页 上页 10 11 12 13 14 15 16 17 下页 最后页
发表评论
表情
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
打开HTML
打开UBB
打开表情
隐藏
记住我
昵称   密码   游客无需密码
网址   电邮   [注册]