本文已有最新版本:

  请点击Nginx 0.8.x + PHP 5.2.13(FastCGI)搭建胜过Apache十倍的Web服务器(第6版)




  [文章作者:张宴 本文版本:v4.14 最后修改:2009.04.14 转载请注明原文链接:http://blog.zyan.cc/nginx_php_v4/]

  前言:本文是我撰写的关于搭建“Nginx + PHP(FastCGI)”Web服务器的第4篇文章。本系列文章作为国内最早详细介绍 Nginx + PHP 安装、配置、使用的资料之一,为推动 Nginx 在国内的发展产生了积极的作用。这是一篇关于Nginx 0.7.x系列版本的文章,安装、配置方式与第3篇文章相差不大,但配置参数有不同。Nginx 0.7.x系列版本虽然为开发版,但在很多大型网站的生产环境中已经使用。

  链接:《2007年9月的第1版》、《2007年12月的第2版》、《2008年6月的第3版

  点击在新窗口中浏览此图片

  Nginx ("engine x") 是一个高性能的 HTTP 和反向代理服务器,也是一个 IMAP/POP3/SMTP 代理服务器。 Nginx 是由 Igor Sysoev 为俄罗斯访问量第二的 Rambler.ru 站点开发的,它已经在该站点运行超过两年半了。Igor 将源代码以类BSD许可证的形式发布。

  Nginx 超越 Apache 的高性能和稳定性,使得国内使用 Nginx 作为 Web 服务器的网站也越来越多,其中包括新浪博客新浪播客网易新闻等门户网站频道,六间房56.com等视频分享网站,Discuz!官方论坛水木社区等知名论坛,豆瓣YUPOO相册海内SNS迅雷在线等新兴Web 2.0网站。



  Nginx 的官方中文维基:http://wiki.codemongers.com/NginxChs



  在高并发连接的情况下,Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。根据我的测试结果,Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 可以承受3万以上的并发连接数,相当于同等环境下Apache的10倍

  根据我的经验,4GB内存的服务器+Apache(prefork模式)一般只能处理3000个并发连接,因为它们将占用3GB以上的内存,还得为系统预留1GB的内存。我曾经就有两台Apache服务器,因为在配置文件中设置的MaxClients为4000,当Apache并发连接数达到3800时,导致服务器内存和Swap空间用满而崩溃。

  而这台 Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器在3万并发连接下,开启的10个Nginx进程消耗150M内存(15M*10=150M),开启的64个php-cgi进程消耗1280M内存(20M*64=1280M),加上系统自身消耗的内存,总共消耗不到2GB内存。如果服务器内存较小,完全可以只开启25个php-cgi进程,这样php-cgi消耗的总内存数才500M。

  在3万并发连接下,访问Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器的PHP程序,仍然速度飞快。下图为Nginx的状态监控页面,显示的活动连接数为28457(关于Nginx的监控页配置,会在本文接下来所给出的Nginx配置文件中写明):

  点击在新窗口中浏览此图片

  我生产环境下的两台Nginx + PHP5(FastCGI)服务器,跑多个一般复杂的纯PHP动态程序,单台Nginx + PHP5(FastCGI)服务器跑PHP动态程序的处理能力已经超过“700次请求/秒”,相当于每天可以承受6000万(700*60*60*24=60480000)的访问量(更多信息见此),而服务器的系统负载也不高:

  点击在新窗口中浏览此图片



  安装步骤:
  (系统要求:Linux 2.6+ 内核,本文中的Linux操作系统为CentOS 5.1,另在RedHat AS4上也安装成功)

  一、获取相关开源程序:
  1、【适用CentOS操作系统】利用CentOS Linux系统自带的yum命令安装、升级所需的程序库(RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包,进行安装):
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers


  2、【适用RedHat操作系统】RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包(事先可通过类似“rpm -qa | grep libjpeg”的命令查看所需的RPM包是否存在,通常是“xxx-devel”不存在,需要安装)。RedHat可以直接利用CentOS的RPM包安装,以下是RPM包下载网址:
  ①、RedHat AS4 & CentOS 4
  http://mirror.be10.com/centos/4/os/i386/CentOS/RPMS/
  http://mirror.be10.com/centos/4/os/x86_64/CentOS/RPMS/

  ②、RedHat AS5 & CentOS 5
  http://mirror.be10.com/centos/5/os/i386/CentOS/
  http://mirror.be10.com/centos/5/os/x86_64/CentOS/

  ③、RPM包搜索网站
  http://rpm.pbone.net/
  http://www.rpmfind.net/

  ④、RedHat AS4 系统环境,通常情况下缺少的支持包安装:
  Ⅰ、i386 系统

  Ⅱ、x86_64 系统


  3、【适用CentOS、RedHat及其它Linux操作系统】下载程序源码包:
  本文中提到的所有开源软件为截止到2009年04月14日的最新稳定版。
  ①、从软件的官方网站下载:
mkdir -p /data0/software
cd /data0/software
wget http://sysoev.ru/nginx/nginx-0.7.51.tar.gz
wget http://www.php.net/get/php-5.2.8.tar.gz/from/this/mirror
wget http://php-fpm.anight.org/downloads/head/php-5.2.8-fpm-0.5.10.diff.gz
wget http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.33.zip/from/http://mysql.mirror.redwire.net/
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.5.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-7.8.tar.gz
wget http://bart.eaccelerator.net/source/0.9.5.3/eaccelerator-0.9.5.3.tar.bz2
wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://pecl.php.net/get/imagick-2.2.2.tgz

  ②、从blog.zyan.cc下载(比较稳定,只允许在本站,或者在Linux/Unix下通过Wget、Curl等命令下载以下软件):
mkdir -p /data0/software
cd /data0/software
wget http://blog.zyan.cc/soft/linux/nginx_php/nginx/nginx-0.7.51.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/php/php-5.2.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/phpfpm/php-5.2.8-fpm-0.5.10.diff.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mysql/mysql-5.1.33.zip
wget http://blog.zyan.cc/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/pcre/pcre-7.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.5.3.tar.bz2
wget http://blog.zyan.cc/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/imagick-2.2.2.tgz



  二、安装PHP 5.2.8(FastCGI模式)
  1、编译安装PHP 5.2.8所需的支持库:
tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../



  2、编译安装MySQL 5.1.33
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
unzip mysql-5.1.33.zip
cd mysql-5.1.33/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
cd ../



  附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下两步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。
  ①、以mysql用户帐号的身份建立数据表:
/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=mysql


  ②、启动MySQL(最后的&表示在后台运行)
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &



  3、编译安装PHP(FastCGI模式)
tar zxvf php-5.2.8.tar.gz
gzip -cd php-5.2.8-fpm-0.5.10.diff.gz | patch -d php-5.2.8 -p1
cd php-5.2.8/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../



  4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../


  5、修改php.ini文件
  手工修改:查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
  修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
  并在此行后增加以下几行,然后保存:
  extension = "memcache.so"
  extension = "pdo_mysql.so"
  extension = "imagick.so"

  再查找output_buffering = Off
  修改为output_buffering = On

  自动修改:若嫌手工修改麻烦,可执行以下shell命令,自动完成对php.ini文件的修改:
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini


  6、配置eAccelerator加速PHP:
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini

  按shift+g键跳到配置文件的最末尾,加上以下配置信息:
引用
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"


  修改配置文件:
vi /etc/sysctl.conf

  输入以下内容:
引用
kernel.shmmax = 134217728

  然后执行以下命令使配置生效:
/sbin/sysctl -p



  7、创建www用户和组,以及供blog.zyan.cc和www.zyan.cc两个虚拟主机使用的目录:
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www


  8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):
  在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf

  输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的<value name="display_errors">0</value>改为<value name="display_errors">1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页):  9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程),用户为www:
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start

  注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload。



  三、安装Nginx 0.7.51
  1、安装Nginx所需的pcre库:
tar zxvf pcre-7.8.tar.gz
cd pcre-7.8/
./configure
make && make install
cd ../


  2、安装Nginx
tar zxvf nginx-0.7.51.tar.gz
cd nginx-0.7.51/
./configure --user=www --group=www --prefix=/usr/local/webserver/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
cd ../


  3、创建Nginx日志目录
mkdir -p /data1/logs
chmod +w /data1/logs
chown -R www:www /data1/logs


  4、创建Nginx配置文件
  ①、在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件:
rm -f /usr/local/webserver/nginx/conf/nginx.conf
vi /usr/local/webserver/nginx/conf/nginx.conf

  输入以下内容:
引用
user  www www;

worker_processes 8;

error_log  /data1/logs/nginx_error.log  crit;

pid        /usr/local/webserver/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;

events
{
  use epoll;
  worker_connections 51200;
}

http
{
  include       mime.types;
  default_type  application/octet-stream;

  #charset  gb2312;
      
  server_names_hash_bucket_size 128;
  client_header_buffer_size 32k;
  large_client_header_buffers 4 32k;
  client_max_body_size 8m;
      
  sendfile on;
  tcp_nopush     on;

  keepalive_timeout 60;

  tcp_nodelay on;

  fastcgi_connect_timeout 300;
  fastcgi_send_timeout 300;
  fastcgi_read_timeout 300;
  fastcgi_buffer_size 64k;
  fastcgi_buffers 4 64k;
  fastcgi_busy_buffers_size 128k;
  fastcgi_temp_file_write_size 128k;

  gzip on;
  gzip_min_length  1k;
  gzip_buffers     4 16k;
  gzip_http_version 1.0;
  gzip_comp_level 2;
  gzip_types       text/plain application/x-javascript text/css application/xml;
  gzip_vary on;

  #limit_zone  crawler  $binary_remote_addr  10m;

  server
  {
    listen       80;
    server_name  blog.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/blog;

    #limit_conn   crawler  20;    
                            
    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }
    
    location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
    {
      expires      30d;
    }

    location ~ .*\.(js|css)?$
    {
      expires      1h;
    }    

    log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '
              '$status $body_bytes_sent "$http_referer" '
              '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/access.log  access;
      }

  server
  {
    listen       80;
    server_name  www.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/www;

    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }

    log_format  wwwlogs  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/wwwlogs.log  wwwlogs;
  }

  server
  {
    listen  80;
    server_name  status.blog.zyan.cc;

    location / {
    stub_status on;
    access_log   off;
    }
  }
}


  ②、在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件:
vi /usr/local/webserver/nginx/conf/fcgi.conf

  输入以下内容:
引用
fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;


  5、启动Nginx
ulimit -SHn 51200
/usr/local/webserver/nginx/sbin/nginx



  四、配置开机自动启动Nginx + PHP
vi /etc/rc.local

  在末尾增加以下内容:
引用
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx



  五、优化Linux内核参数
vi /etc/sysctl.conf

  在末尾增加以下内容:
引用
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000    65000


  使配置立即生效:
/sbin/sysctl -p



  六、在不停止Nginx服务的情况下平滑变更Nginx配置
  1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:
/usr/local/webserver/nginx/sbin/nginx -t

  如果屏幕显示以下两行信息,说明配置文件正确:
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully


  2、这时,输入以下命令查看Nginx主进程号:
ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'

  屏幕显示的即为Nginx主进程号,例如:
  6302
  这时,执行以下命令即可使修改过的Nginx配置文件生效:
kill -HUP 6302

  或者无需这么麻烦,找到Nginx的Pid文件:
kill -HUP `cat /usr/local/webserver/nginx/nginx.pid`



  七、编写每天定时切割Nginx日志的脚本
  1、创建脚本/usr/local/webserver/nginx/sbin/cut_nginx_log.sh
vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh

  输入以下内容:
引用
#!/bin/bash
# This script run at 00:00

# The Nginx logs path
logs_path="/usr/local/webserver/nginx/logs/"

mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`


  2、设置crontab,每天凌晨00:00切割nginx访问日志
crontab -e

  输入以下内容:
引用
00 00 * * * /bin/bash  /usr/local/webserver/nginx/sbin/cut_nginx_log.sh




  本文若有小的修改,会第一时间在以下网址发布:
  http://blog.zyan.cc/post/366.htm



  附:文章修改历史

  ● [2008年08月29日] [Version 4.0] 撰写本文

  ● [2008年09月03日] [Version 4.1] 修改了nginx.conf文件有关gzip压缩的项,“gzip_http_version 1.1;”改为“gzip_http_version 1.0;”,增加一项“gzip_vary on;”,目的是为了让Nginx前端的Squid 2.5/2.6缓存服务器能够缓存经过gzip压缩的页面。另外,将nginx版本由0.7.13升级到最新的0.7.14。

  ● [2008年10月06日] [Version 4.2] 增加第七章──“编写每天定时切割Nginx日志的脚本”;升级Nginx版本到0.7.17;升级PHP FastCGI补丁到php-5.2.6-fpm-0.5.9.diff.gz;修改php-fpm.conf配置文件。

  ● [2008年10月26日] [Version 4.3] 升级Nginx版本到0.7.19。

  ● [2008年11月02日] [Version 4.4] 升级MySQL版本到5.1.29-rc。对文中涉及到的开源软件增加blog.zyan.cc下载点。

  ● [2008年11月11日] [Version 4.5] MySQL编译参数加上对InnoDB存储引擎的支持。

  ● [2008年11月14日] [Version 4.6] 解决在某些64位CentOS系统上,编译PHP时出现的libcrypto和libcurl无法找到的错误;升级Nginx版本到0.7.21。

  ● [2008年11月24日] [Version 4.7] 为PHP增加PDO_MYSQL扩展支持;升级PHP的Memcache扩展到2.2.4版本;升级PCRE版本到0.7.8;升级Nginx版本到0.7.22。

  ● [2008年12月12日] [Version 4.8] 升级Nginx版本到0.7.26;升级MySQL版本到5.1.30。

  ● [2008年12月17日] [Version 4.9] 编译PHP时的“sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile”和“make”两条语句改为“make ZEND_EXTRA_LIBS='-liconv'”;升级Nginx版本到0.7.27;升级PHP版本到5.2.8;升级PHP FastCGI补丁到php-5.2.8-fpm-0.5.10.diff.gz。

  ● [2008年12月23日] [Version 4.10] 编译PHP时增加此三项支持:--with-mhash --enable-pcntl --enable-sockets

  ● [2009年01月15日] [Version 4.11] 升级Nginx版本到0.7.30

  ● [2009年01月17日] [Version 4.12] 增加 RedHat AS4 系统环境通常情况下缺少的支持包安装。

  ● [2009年04月02日] [Version 4.13] 升级Nginx版本到0.7.47;升级MySQL版本到5.1.33;升级PHP的Memcache扩展到2.2.5版本;升级libiconv版本到1.13;升级mcrypt版本到2.6.8;升级mhash版本到0.9.9.9;。

  ● [2009年04月14日] [Version 4.13] 升级Nginx版本到0.7.51;为PHP增加ldap支持;为PHP增加ImageMagick支持。

  (全文完)




技术大类 » Web服务器 | 评论(330) | 引用(0) | 阅读(665470)
yyrjw
2008-10-28 16:47
请问下nginx里面通配大小写怎么做?要加模块?用正则好像不行吧
dfg
2008-10-29 21:56
windows下不能安装吗?
WinLinKer
2008-11-2 13:57
cd memcache-2.2.3/
/usr/local/webserver/php/bin/phpize
./configure  
我解压了之后,在memcache-2.2.3  里面根本没有发现configure
[root@Centos52 soft]# tar zxvf memcache-2.2.3.tgz
package.xml
memcache-2.2.3/config.m4
memcache-2.2.3/config9.m4
memcache-2.2.3/config.w32
memcache-2.2.3/CREDITS
memcache-2.2.3/example.php
memcache-2.2.3/memcache.c
memcache-2.2.3/memcache_queue.c
memcache-2.2.3/memcache_session.c
memcache-2.2.3/memcache_standard_hash.c
memcache-2.2.3/memcache_consistent_hash.c
memcache-2.2.3/memcache.dsp
memcache-2.2.3/php_memcache.h
memcache-2.2.3/memcache_queue.h
memcache-2.2.3/README

请张晏帮忙解释下
[root@Centos52 memcache-2.2.3]# /usr/local/php/bin/phpize ./configure --with-php-config=/usr/local/php/bin/php-config
Configuring for:
PHP Api Version:         20041225
Zend Module Api No:      20060613
Zend Extension Api No:   220060519
Cannot find autoconf. Please check your autoconf installation and the $PHP_AUTOCONF
environment variable is set correctly and then rerun this script.
WinLinKer
2008-11-2 13:58
刚才那个问题解决了,有个组件我没有安装,autoconf-2.59-12.noarch.rpm希望有同样问题的网友可以解决下。
WinLinKer
2008-11-2 14:19
/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613 这个目录我怎么找不到的
./configure --prefix=/usr/local/php/ --with-mysql=/usr/local/mysql/  --with-config-file-path=/etc/ -with-iconv=/usr/local/libiconv/ --with-freetype-dir  --with-jpeg-dir --with-png-dir  --with-zlib   with-libxml-dir --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem  --enable-inline-optimization --with-curl  --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring  --with-mcrypt=/usr/local/libmcrypt/ --with-gd=/usr/local/gd/ --enable-gd-native-ttf --with-openssl
这么配置,有错误么??
gggg
2008-11-4 09:43
webserver/mysql/
后面不用/吧
mageguoshi
2008-11-4 11:08
请问张宴老师,php-fpm.conf这个配置文件是否有定义php连接mysql的字符集的设置,因为我的mysql连接字符集是latin1,然后我在php.ini里添加mysql.connect_charset = latin1竟然不管用。哪里可以设置这个变量。谢谢了!
2008-11-5 22:23
请张哥和大家帮忙看看,我遇到的问题究竟是怎么的。
1.按照教程里边启动MYsql一直提示找不到mysql.sock,必须su到mysql下才能启动,并且都不能用教程里边的命令,而用/web/mysql/libexec/mysqld --skip-grant &才能启动。
2.nginx安装成功,用启动命令启动时没有提示,能够查到其pid,但是,通过局域网内其他计算机访问网页却不成功,连nginx的页面都看不到。

谢谢大家抽出时间看看,希望大家帮助!
smarteng
2008-11-8 11:42
我在我的机器上做了上面的试验,os为Redhat Enterprise Linux 5.0
但是这个mysql 安装完毕后,怎么也启动不成功,不知道是什么原因
提示错误:
081108 11:37:09 [ERROR] /usr/local/webserver/mysql/libexec/mysqld: unknown option '--skip-federated'
081108 11:37:09 [ERROR] Aborting
081108 11:37:09 [Note] /usr/local/webserver/mysql/libexec/mysqld: Shutdown complete
smarteng
2008-11-8 12:11
我在我自己的机器上做了试验,OS为Redhat Enterprise Linux 5.0
一切都ok了,就是这个mysql启动不成功,
以mysql用户帐号的身份建立数据表的时候
错误提示:
081108 12:08:47 [ERROR] /usr/local/webserver/mysql/libexec/mysqld: unknown option '--skip-federated'
081108 12:08:47 [ERROR] Aborting
081108 12:08:47 [Note] /usr/local/webserver/mysql/libexec/mysqld: Shutdown complete
[root@HIPU mysql-5.1.29-rc]# /usr/local/webserver/mysql/bin/mysql -u root -h localhost
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
请指教
xblang
2008-11-9 02:53
请问楼主,如何添加zend?如何修改配置文件?另外,重启后,mysql就无法启动?
smarteng
2008-11-9 16:27
今天我启动机器,在执行
/usr/local/webserver/php/sbin/php-fpm start发生了如下错误

Starting php_fpm /usr/local/webserver/php/bin/php-cgi: error while loading shared libraries: libmysqlclient.so.16: cannot open shared object file: No such file or directory
failed
这是什么原因?
caicai
2008-11-11 13:31
按照安装手册进行安装, 在执行到安装数据库的时候出错,提示
Installing MySQL system tables...
[ERROR] /usr/local/mysql/libexec/mysqld: unknown option '--skip-federated'
[ERROR] Aborting
[Note] /usr/local/mysql/libexec/mysqld: Shutdown complete


检查了一下, 尝试修改一下my.cnf,居然成功了,这个问题只要修改一下/etc/my.cnf这个文件,查找skip-federated这个关键字,并在这个字前加一个#, 即注释掉这个选项即可解决这个问题.
2008-11-12 11:07
请问一下 这套东西 怎么整合一下tomcat呢
lousam
2008-11-14 10:27
顶下先,学习中,接着看
沧海一笑
2008-11-15 12:11
张老师,请问在nginx如何实现这样的功能,泛域名目录自动匹配,如: blogs.google.com==>/html/b/bl/blo/blogs.google.com
如能指教,不胜感谢!!
shunz Email Homepage
2008-11-15 12:54
to 张宴
有一个问题,google了很久也不知如何解决:
普通的文件如果不存在,nginx会返回404,但是如果php文件不存在,nginx还是直接将请求传到php-cgi,而php-cgi会返回:“No input file specified. ”,而nginx将php-cgi返回的所有状态都重置为200,这样,当php文件不存在的时候,无法正常返回404错误,这个问题该如何解决?
gmle
2008-11-17 14:50
smile受益啦,谢谢啦。
bob
2008-11-19 11:14
我是菜鸟,照你的方法装到PHP5扩展模块无法编译报
checking for re2c... no
configure: WARNING: You will need re2c 0.12.0 or later if you want to regenerate PHP parsers.
是怎么回事?急!!!!
MEMCACHE
2008-11-19 14:00
memcache已经有2.2.4了
分页: 5/17 第一页 上页 1 2 3 4 5 6 7 8 9 10 下页 最后页
发表评论
表情
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
打开HTML
打开UBB
打开表情
隐藏
记住我
昵称   密码   游客无需密码
网址   电邮   [注册]