本文已有最新版本:

  请点击Nginx 0.8.x + PHP 5.2.13(FastCGI)搭建胜过Apache十倍的Web服务器(第6版)




  [文章作者:张宴 本文版本:v4.14 最后修改:2009.04.14 转载请注明原文链接:http://blog.zyan.cc/nginx_php_v4/]

  前言:本文是我撰写的关于搭建“Nginx + PHP(FastCGI)”Web服务器的第4篇文章。本系列文章作为国内最早详细介绍 Nginx + PHP 安装、配置、使用的资料之一,为推动 Nginx 在国内的发展产生了积极的作用。这是一篇关于Nginx 0.7.x系列版本的文章,安装、配置方式与第3篇文章相差不大,但配置参数有不同。Nginx 0.7.x系列版本虽然为开发版,但在很多大型网站的生产环境中已经使用。

  链接:《2007年9月的第1版》、《2007年12月的第2版》、《2008年6月的第3版

  点击在新窗口中浏览此图片

  Nginx ("engine x") 是一个高性能的 HTTP 和反向代理服务器,也是一个 IMAP/POP3/SMTP 代理服务器。 Nginx 是由 Igor Sysoev 为俄罗斯访问量第二的 Rambler.ru 站点开发的,它已经在该站点运行超过两年半了。Igor 将源代码以类BSD许可证的形式发布。

  Nginx 超越 Apache 的高性能和稳定性,使得国内使用 Nginx 作为 Web 服务器的网站也越来越多,其中包括新浪博客新浪播客网易新闻等门户网站频道,六间房56.com等视频分享网站,Discuz!官方论坛水木社区等知名论坛,豆瓣YUPOO相册海内SNS迅雷在线等新兴Web 2.0网站。



  Nginx 的官方中文维基:http://wiki.codemongers.com/NginxChs



  在高并发连接的情况下,Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。根据我的测试结果,Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 可以承受3万以上的并发连接数,相当于同等环境下Apache的10倍

  根据我的经验,4GB内存的服务器+Apache(prefork模式)一般只能处理3000个并发连接,因为它们将占用3GB以上的内存,还得为系统预留1GB的内存。我曾经就有两台Apache服务器,因为在配置文件中设置的MaxClients为4000,当Apache并发连接数达到3800时,导致服务器内存和Swap空间用满而崩溃。

  而这台 Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器在3万并发连接下,开启的10个Nginx进程消耗150M内存(15M*10=150M),开启的64个php-cgi进程消耗1280M内存(20M*64=1280M),加上系统自身消耗的内存,总共消耗不到2GB内存。如果服务器内存较小,完全可以只开启25个php-cgi进程,这样php-cgi消耗的总内存数才500M。

  在3万并发连接下,访问Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器的PHP程序,仍然速度飞快。下图为Nginx的状态监控页面,显示的活动连接数为28457(关于Nginx的监控页配置,会在本文接下来所给出的Nginx配置文件中写明):

  点击在新窗口中浏览此图片

  我生产环境下的两台Nginx + PHP5(FastCGI)服务器,跑多个一般复杂的纯PHP动态程序,单台Nginx + PHP5(FastCGI)服务器跑PHP动态程序的处理能力已经超过“700次请求/秒”,相当于每天可以承受6000万(700*60*60*24=60480000)的访问量(更多信息见此),而服务器的系统负载也不高:

  点击在新窗口中浏览此图片



  安装步骤:
  (系统要求:Linux 2.6+ 内核,本文中的Linux操作系统为CentOS 5.1,另在RedHat AS4上也安装成功)

  一、获取相关开源程序:
  1、【适用CentOS操作系统】利用CentOS Linux系统自带的yum命令安装、升级所需的程序库(RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包,进行安装):
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers


  2、【适用RedHat操作系统】RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包(事先可通过类似“rpm -qa | grep libjpeg”的命令查看所需的RPM包是否存在,通常是“xxx-devel”不存在,需要安装)。RedHat可以直接利用CentOS的RPM包安装,以下是RPM包下载网址:
  ①、RedHat AS4 & CentOS 4
  http://mirror.be10.com/centos/4/os/i386/CentOS/RPMS/
  http://mirror.be10.com/centos/4/os/x86_64/CentOS/RPMS/

  ②、RedHat AS5 & CentOS 5
  http://mirror.be10.com/centos/5/os/i386/CentOS/
  http://mirror.be10.com/centos/5/os/x86_64/CentOS/

  ③、RPM包搜索网站
  http://rpm.pbone.net/
  http://www.rpmfind.net/

  ④、RedHat AS4 系统环境,通常情况下缺少的支持包安装:
  Ⅰ、i386 系统

  Ⅱ、x86_64 系统


  3、【适用CentOS、RedHat及其它Linux操作系统】下载程序源码包:
  本文中提到的所有开源软件为截止到2009年04月14日的最新稳定版。
  ①、从软件的官方网站下载:
mkdir -p /data0/software
cd /data0/software
wget http://sysoev.ru/nginx/nginx-0.7.51.tar.gz
wget http://www.php.net/get/php-5.2.8.tar.gz/from/this/mirror
wget http://php-fpm.anight.org/downloads/head/php-5.2.8-fpm-0.5.10.diff.gz
wget http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.33.zip/from/http://mysql.mirror.redwire.net/
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.5.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-7.8.tar.gz
wget http://bart.eaccelerator.net/source/0.9.5.3/eaccelerator-0.9.5.3.tar.bz2
wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://pecl.php.net/get/imagick-2.2.2.tgz

  ②、从blog.zyan.cc下载(比较稳定,只允许在本站,或者在Linux/Unix下通过Wget、Curl等命令下载以下软件):
mkdir -p /data0/software
cd /data0/software
wget http://blog.zyan.cc/soft/linux/nginx_php/nginx/nginx-0.7.51.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/php/php-5.2.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/phpfpm/php-5.2.8-fpm-0.5.10.diff.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mysql/mysql-5.1.33.zip
wget http://blog.zyan.cc/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/pcre/pcre-7.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.5.3.tar.bz2
wget http://blog.zyan.cc/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/imagick-2.2.2.tgz



  二、安装PHP 5.2.8(FastCGI模式)
  1、编译安装PHP 5.2.8所需的支持库:
tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../



  2、编译安装MySQL 5.1.33
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
unzip mysql-5.1.33.zip
cd mysql-5.1.33/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
cd ../



  附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下两步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。
  ①、以mysql用户帐号的身份建立数据表:
/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=mysql


  ②、启动MySQL(最后的&表示在后台运行)
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &



  3、编译安装PHP(FastCGI模式)
tar zxvf php-5.2.8.tar.gz
gzip -cd php-5.2.8-fpm-0.5.10.diff.gz | patch -d php-5.2.8 -p1
cd php-5.2.8/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../



  4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../


  5、修改php.ini文件
  手工修改:查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
  修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
  并在此行后增加以下几行,然后保存:
  extension = "memcache.so"
  extension = "pdo_mysql.so"
  extension = "imagick.so"

  再查找output_buffering = Off
  修改为output_buffering = On

  自动修改:若嫌手工修改麻烦,可执行以下shell命令,自动完成对php.ini文件的修改:
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini


  6、配置eAccelerator加速PHP:
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini

  按shift+g键跳到配置文件的最末尾,加上以下配置信息:
引用
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"


  修改配置文件:
vi /etc/sysctl.conf

  输入以下内容:
引用
kernel.shmmax = 134217728

  然后执行以下命令使配置生效:
/sbin/sysctl -p



  7、创建www用户和组,以及供blog.zyan.cc和www.zyan.cc两个虚拟主机使用的目录:
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www


  8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):
  在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf

  输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的<value name="display_errors">0</value>改为<value name="display_errors">1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页):  9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程),用户为www:
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start

  注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload。



  三、安装Nginx 0.7.51
  1、安装Nginx所需的pcre库:
tar zxvf pcre-7.8.tar.gz
cd pcre-7.8/
./configure
make && make install
cd ../


  2、安装Nginx
tar zxvf nginx-0.7.51.tar.gz
cd nginx-0.7.51/
./configure --user=www --group=www --prefix=/usr/local/webserver/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
cd ../


  3、创建Nginx日志目录
mkdir -p /data1/logs
chmod +w /data1/logs
chown -R www:www /data1/logs


  4、创建Nginx配置文件
  ①、在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件:
rm -f /usr/local/webserver/nginx/conf/nginx.conf
vi /usr/local/webserver/nginx/conf/nginx.conf

  输入以下内容:
引用
user  www www;

worker_processes 8;

error_log  /data1/logs/nginx_error.log  crit;

pid        /usr/local/webserver/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;

events
{
  use epoll;
  worker_connections 51200;
}

http
{
  include       mime.types;
  default_type  application/octet-stream;

  #charset  gb2312;
      
  server_names_hash_bucket_size 128;
  client_header_buffer_size 32k;
  large_client_header_buffers 4 32k;
  client_max_body_size 8m;
      
  sendfile on;
  tcp_nopush     on;

  keepalive_timeout 60;

  tcp_nodelay on;

  fastcgi_connect_timeout 300;
  fastcgi_send_timeout 300;
  fastcgi_read_timeout 300;
  fastcgi_buffer_size 64k;
  fastcgi_buffers 4 64k;
  fastcgi_busy_buffers_size 128k;
  fastcgi_temp_file_write_size 128k;

  gzip on;
  gzip_min_length  1k;
  gzip_buffers     4 16k;
  gzip_http_version 1.0;
  gzip_comp_level 2;
  gzip_types       text/plain application/x-javascript text/css application/xml;
  gzip_vary on;

  #limit_zone  crawler  $binary_remote_addr  10m;

  server
  {
    listen       80;
    server_name  blog.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/blog;

    #limit_conn   crawler  20;    
                            
    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }
    
    location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
    {
      expires      30d;
    }

    location ~ .*\.(js|css)?$
    {
      expires      1h;
    }    

    log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '
              '$status $body_bytes_sent "$http_referer" '
              '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/access.log  access;
      }

  server
  {
    listen       80;
    server_name  www.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/www;

    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }

    log_format  wwwlogs  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/wwwlogs.log  wwwlogs;
  }

  server
  {
    listen  80;
    server_name  status.blog.zyan.cc;

    location / {
    stub_status on;
    access_log   off;
    }
  }
}


  ②、在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件:
vi /usr/local/webserver/nginx/conf/fcgi.conf

  输入以下内容:
引用
fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;


  5、启动Nginx
ulimit -SHn 51200
/usr/local/webserver/nginx/sbin/nginx



  四、配置开机自动启动Nginx + PHP
vi /etc/rc.local

  在末尾增加以下内容:
引用
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx



  五、优化Linux内核参数
vi /etc/sysctl.conf

  在末尾增加以下内容:
引用
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000    65000


  使配置立即生效:
/sbin/sysctl -p



  六、在不停止Nginx服务的情况下平滑变更Nginx配置
  1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:
/usr/local/webserver/nginx/sbin/nginx -t

  如果屏幕显示以下两行信息,说明配置文件正确:
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully


  2、这时,输入以下命令查看Nginx主进程号:
ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'

  屏幕显示的即为Nginx主进程号,例如:
  6302
  这时,执行以下命令即可使修改过的Nginx配置文件生效:
kill -HUP 6302

  或者无需这么麻烦,找到Nginx的Pid文件:
kill -HUP `cat /usr/local/webserver/nginx/nginx.pid`



  七、编写每天定时切割Nginx日志的脚本
  1、创建脚本/usr/local/webserver/nginx/sbin/cut_nginx_log.sh
vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh

  输入以下内容:
引用
#!/bin/bash
# This script run at 00:00

# The Nginx logs path
logs_path="/usr/local/webserver/nginx/logs/"

mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`


  2、设置crontab,每天凌晨00:00切割nginx访问日志
crontab -e

  输入以下内容:
引用
00 00 * * * /bin/bash  /usr/local/webserver/nginx/sbin/cut_nginx_log.sh




  本文若有小的修改,会第一时间在以下网址发布:
  http://blog.zyan.cc/post/366.htm



  附:文章修改历史

  ● [2008年08月29日] [Version 4.0] 撰写本文

  ● [2008年09月03日] [Version 4.1] 修改了nginx.conf文件有关gzip压缩的项,“gzip_http_version 1.1;”改为“gzip_http_version 1.0;”,增加一项“gzip_vary on;”,目的是为了让Nginx前端的Squid 2.5/2.6缓存服务器能够缓存经过gzip压缩的页面。另外,将nginx版本由0.7.13升级到最新的0.7.14。

  ● [2008年10月06日] [Version 4.2] 增加第七章──“编写每天定时切割Nginx日志的脚本”;升级Nginx版本到0.7.17;升级PHP FastCGI补丁到php-5.2.6-fpm-0.5.9.diff.gz;修改php-fpm.conf配置文件。

  ● [2008年10月26日] [Version 4.3] 升级Nginx版本到0.7.19。

  ● [2008年11月02日] [Version 4.4] 升级MySQL版本到5.1.29-rc。对文中涉及到的开源软件增加blog.zyan.cc下载点。

  ● [2008年11月11日] [Version 4.5] MySQL编译参数加上对InnoDB存储引擎的支持。

  ● [2008年11月14日] [Version 4.6] 解决在某些64位CentOS系统上,编译PHP时出现的libcrypto和libcurl无法找到的错误;升级Nginx版本到0.7.21。

  ● [2008年11月24日] [Version 4.7] 为PHP增加PDO_MYSQL扩展支持;升级PHP的Memcache扩展到2.2.4版本;升级PCRE版本到0.7.8;升级Nginx版本到0.7.22。

  ● [2008年12月12日] [Version 4.8] 升级Nginx版本到0.7.26;升级MySQL版本到5.1.30。

  ● [2008年12月17日] [Version 4.9] 编译PHP时的“sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile”和“make”两条语句改为“make ZEND_EXTRA_LIBS='-liconv'”;升级Nginx版本到0.7.27;升级PHP版本到5.2.8;升级PHP FastCGI补丁到php-5.2.8-fpm-0.5.10.diff.gz。

  ● [2008年12月23日] [Version 4.10] 编译PHP时增加此三项支持:--with-mhash --enable-pcntl --enable-sockets

  ● [2009年01月15日] [Version 4.11] 升级Nginx版本到0.7.30

  ● [2009年01月17日] [Version 4.12] 增加 RedHat AS4 系统环境通常情况下缺少的支持包安装。

  ● [2009年04月02日] [Version 4.13] 升级Nginx版本到0.7.47;升级MySQL版本到5.1.33;升级PHP的Memcache扩展到2.2.5版本;升级libiconv版本到1.13;升级mcrypt版本到2.6.8;升级mhash版本到0.9.9.9;。

  ● [2009年04月14日] [Version 4.13] 升级Nginx版本到0.7.51;为PHP增加ldap支持;为PHP增加ImageMagick支持。

  (全文完)




技术大类 » Web服务器 | 评论(330) | 引用(0) | 阅读(665479)
MEMCACHE
2008-11-19 14:02
PCRE已经有7.8了
张宴 回复于 2008-11-25 18:33
已经更新。
anderschen Email
2008-11-24 21:05
我安装成功rhel5.2 + nginx 0.7.22
虚拟主机为www.cssweb.com和blog.cssweb.com
访问www.cssweb.com/index.html正常
访问www.cssweb.com/demo.php出现文件下载对话框,怎么回事啊,有没有碰到过这个问题,郁闷
阿泽
2008-11-25 16:58
前面安装全正常,就是在9、启动php-cgi进程,监听127.0.0.1的9000端口 出错,要怎么办
[root@gxrc software]# ulimit -SHn 51200
[root@gxrc software]# /usr/local/webserver/php/sbin/php-fpm start
Starting php_fpm /usr/local/webserver/php/etc/php-fpm.conf:2: parser error : Start tag expected, '<' not found
nfiguration>  
^
Nov 25 16:56:46.638017 [ERROR] fpm_conf_init_main(), line 517: failed to load configuration file: failed to parse conf file
failed
[root@gxrc software]#
张宴 回复于 2008-11-25 18:33
php-fpm.conf配置文件有问题,建议你用鼠标拖动选择本文中的php-fpm.conf内容,ctrl+c复制,粘贴。
anderschen Email
2008-11-25 20:51
张宴兄, php不能解析出现下载对话框给你发过邮件了,附件是所有的配置文件, 拜托看一下吧,是配置文件写的有问题,还有什么别的问题啊
jinlan21 Email
2008-11-27 09:23
请问我在安装mcrypt进行到/sbin/ldconfig时出现这提示:/sbin/ldconfig: /usr/lib/libmcrypt.so.4 is not a symbolic link
请问这有没有影响???
wg2008 Email
2008-11-27 10:16
你好,有没有在freebsd中的安装方法?
夏天 Email Homepage
2008-11-28 02:09
张兄,按照你的教程安装完 nginx 之后,php不支持 index.php/post/id/214 这种写法,请问是哪里的问题呢?
MMCACHE
2008-11-30 01:22
挺好。个别地方建议:
1、MYSQL已经发布了5.1.30GA,建议更新
2、NGINX又更新了,0.7.23和0.6.34,晕,版本太快
3、关于日志切割部分,logs_path="/usr/local/webserver/nginx/logs/"似乎和前文日志目录/data1/logs矛盾不一致了?
另外请教一下,使用PDO_MYSQL在性能上如何?
cocely
2008-12-4 17:42
张老师:请教

<html>

<head><title>411 Length Required</title></head>

<body bgcolor="white">

<center><h1>411 Length Required</h1></center>

<hr><center>nginx/0.7.19</center>

</body>

</html>

我用的EXT的ajax调用页面出现此问题,用的是post模式

直接打页面网址没问题

   client_max_body_size 20m;   我参考前面改成这样也不能解决问题

忘张老师有时间指导下,学生感激不尽!
Karl
2008-12-5 14:13
我按张老师的方法安装mysql5.1.29时总是不能生成mysql.sock,怎么解决呀?
juven Email
2008-12-5 16:32
张老师。能否提供一下nginx.conf文件的参数说明。我配出来了,但对配置文件中语句的含义知之甚少。。文档发达我的邮箱吧:hongjun88@126.com谢谢!
zhizhidou
2008-12-6 20:44
能否问一下,张老师装在CentOS的哪个版本上,还有就是都安装了那些系统组件!
tllswa
2008-12-7 22:50
Very Good。明在就装个RHEL4做这个实验。
finy
2008-12-7 23:26
至强3.0 双CPU 8G内存
按照你的配置,并没有发现并发承受3w ,用webbench压只能到500,然后就开始502 bad gateway了。

已经排除处理超时等因素,php-cgi进程开到1000. 仍然是只能压到500并发
请问还有什么可能原因?
phpbb
2008-12-9 15:33
就问一个问题,PHPBB迁移到PHP5上,不能显示啊,是空白页,
oio
2008-12-9 15:36
/viewtopic.php/t/4

这种形式的需要如何配置?

不需要rewrite支持的
你好
2008-12-10 19:58
apache下的规则是这样的:
RewriteEngine on
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ index.php/$1 [QSA,PT,L]
nginx下的应该怎么写啊?
谢谢了!
Justin Homepage
2008-12-13 20:04
sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile
make

这两句可以用下面这句代替

make ZEND_EXTRA_LIBS='-liconv'

Regards,
Justin
狂乱的眼
2008-12-14 00:03
想问一下你的centos安装时候用的是那种方式?最小还是服务器还是自定义?因为我发现用了最小安装以后,能正常安装nginx,php,mysql.但是没有办法安装任何一个辅助的如eAccelerator,Memcache等,希望张兄告知,多谢
张宴 回复于 2008-12-15 09:13
自定义。
Jeff Email
2008-12-15 02:41
求教一下,我是用的VPS(Virtual Private Server), 内存总共只有600M,要安装Web服务器和MySQL服务器,应该怎么修改配置比较好些?
张宴 回复于 2008-12-15 09:12
见:http://blog.s135.com/post/375.htm
Nginx 0.7.x + PHP 5.2.6(FastCGI)+ MySQL 5.1 在128M小内存VPS服务器上的配置优化
分页: 6/17 第一页 上页 1 2 3 4 5 6 7 8 9 10 下页 最后页
发表评论
表情
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
打开HTML
打开UBB
打开表情
隐藏
记住我
昵称   密码   游客无需密码
网址   电邮   [注册]