本文已有最新版本:

  请点击Nginx 0.8.x + PHP 5.2.13(FastCGI)搭建胜过Apache十倍的Web服务器(第6版)




  [文章作者:张宴 本文版本:v4.14 最后修改:2009.04.14 转载请注明原文链接:http://blog.zyan.cc/nginx_php_v4/]

  前言:本文是我撰写的关于搭建“Nginx + PHP(FastCGI)”Web服务器的第4篇文章。本系列文章作为国内最早详细介绍 Nginx + PHP 安装、配置、使用的资料之一,为推动 Nginx 在国内的发展产生了积极的作用。这是一篇关于Nginx 0.7.x系列版本的文章,安装、配置方式与第3篇文章相差不大,但配置参数有不同。Nginx 0.7.x系列版本虽然为开发版,但在很多大型网站的生产环境中已经使用。

  链接:《2007年9月的第1版》、《2007年12月的第2版》、《2008年6月的第3版

  点击在新窗口中浏览此图片

  Nginx ("engine x") 是一个高性能的 HTTP 和反向代理服务器,也是一个 IMAP/POP3/SMTP 代理服务器。 Nginx 是由 Igor Sysoev 为俄罗斯访问量第二的 Rambler.ru 站点开发的,它已经在该站点运行超过两年半了。Igor 将源代码以类BSD许可证的形式发布。

  Nginx 超越 Apache 的高性能和稳定性,使得国内使用 Nginx 作为 Web 服务器的网站也越来越多,其中包括新浪博客新浪播客网易新闻等门户网站频道,六间房56.com等视频分享网站,Discuz!官方论坛水木社区等知名论坛,豆瓣YUPOO相册海内SNS迅雷在线等新兴Web 2.0网站。



  Nginx 的官方中文维基:http://wiki.codemongers.com/NginxChs



  在高并发连接的情况下,Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。根据我的测试结果,Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 可以承受3万以上的并发连接数,相当于同等环境下Apache的10倍

  根据我的经验,4GB内存的服务器+Apache(prefork模式)一般只能处理3000个并发连接,因为它们将占用3GB以上的内存,还得为系统预留1GB的内存。我曾经就有两台Apache服务器,因为在配置文件中设置的MaxClients为4000,当Apache并发连接数达到3800时,导致服务器内存和Swap空间用满而崩溃。

  而这台 Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器在3万并发连接下,开启的10个Nginx进程消耗150M内存(15M*10=150M),开启的64个php-cgi进程消耗1280M内存(20M*64=1280M),加上系统自身消耗的内存,总共消耗不到2GB内存。如果服务器内存较小,完全可以只开启25个php-cgi进程,这样php-cgi消耗的总内存数才500M。

  在3万并发连接下,访问Nginx 0.7.51 + PHP 5.2.8 (FastCGI) 服务器的PHP程序,仍然速度飞快。下图为Nginx的状态监控页面,显示的活动连接数为28457(关于Nginx的监控页配置,会在本文接下来所给出的Nginx配置文件中写明):

  点击在新窗口中浏览此图片

  我生产环境下的两台Nginx + PHP5(FastCGI)服务器,跑多个一般复杂的纯PHP动态程序,单台Nginx + PHP5(FastCGI)服务器跑PHP动态程序的处理能力已经超过“700次请求/秒”,相当于每天可以承受6000万(700*60*60*24=60480000)的访问量(更多信息见此),而服务器的系统负载也不高:

  点击在新窗口中浏览此图片



  安装步骤:
  (系统要求:Linux 2.6+ 内核,本文中的Linux操作系统为CentOS 5.1,另在RedHat AS4上也安装成功)

  一、获取相关开源程序:
  1、【适用CentOS操作系统】利用CentOS Linux系统自带的yum命令安装、升级所需的程序库(RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包,进行安装):
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers


  2、【适用RedHat操作系统】RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包(事先可通过类似“rpm -qa | grep libjpeg”的命令查看所需的RPM包是否存在,通常是“xxx-devel”不存在,需要安装)。RedHat可以直接利用CentOS的RPM包安装,以下是RPM包下载网址:
  ①、RedHat AS4 & CentOS 4
  http://mirror.be10.com/centos/4/os/i386/CentOS/RPMS/
  http://mirror.be10.com/centos/4/os/x86_64/CentOS/RPMS/

  ②、RedHat AS5 & CentOS 5
  http://mirror.be10.com/centos/5/os/i386/CentOS/
  http://mirror.be10.com/centos/5/os/x86_64/CentOS/

  ③、RPM包搜索网站
  http://rpm.pbone.net/
  http://www.rpmfind.net/

  ④、RedHat AS4 系统环境,通常情况下缺少的支持包安装:
  Ⅰ、i386 系统

  Ⅱ、x86_64 系统


  3、【适用CentOS、RedHat及其它Linux操作系统】下载程序源码包:
  本文中提到的所有开源软件为截止到2009年04月14日的最新稳定版。
  ①、从软件的官方网站下载:
mkdir -p /data0/software
cd /data0/software
wget http://sysoev.ru/nginx/nginx-0.7.51.tar.gz
wget http://www.php.net/get/php-5.2.8.tar.gz/from/this/mirror
wget http://php-fpm.anight.org/downloads/head/php-5.2.8-fpm-0.5.10.diff.gz
wget http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.33.zip/from/http://mysql.mirror.redwire.net/
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.5.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-7.8.tar.gz
wget http://bart.eaccelerator.net/source/0.9.5.3/eaccelerator-0.9.5.3.tar.bz2
wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://pecl.php.net/get/imagick-2.2.2.tgz

  ②、从blog.zyan.cc下载(比较稳定,只允许在本站,或者在Linux/Unix下通过Wget、Curl等命令下载以下软件):
mkdir -p /data0/software
cd /data0/software
wget http://blog.zyan.cc/soft/linux/nginx_php/nginx/nginx-0.7.51.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/php/php-5.2.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/phpfpm/php-5.2.8-fpm-0.5.10.diff.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mysql/mysql-5.1.33.zip
wget http://blog.zyan.cc/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/pcre/pcre-7.8.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.5.3.tar.bz2
wget http://blog.zyan.cc/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://blog.zyan.cc/soft/linux/nginx_php/imagick/imagick-2.2.2.tgz



  二、安装PHP 5.2.8(FastCGI模式)
  1、编译安装PHP 5.2.8所需的支持库:
tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../



  2、编译安装MySQL 5.1.33
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
unzip mysql-5.1.33.zip
cd mysql-5.1.33/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
cd ../



  附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下两步。如果你只是希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。
  ①、以mysql用户帐号的身份建立数据表:
/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=mysql


  ②、启动MySQL(最后的&表示在后台运行)
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &



  3、编译安装PHP(FastCGI模式)
tar zxvf php-5.2.8.tar.gz
gzip -cd php-5.2.8-fpm-0.5.10.diff.gz | patch -d php-5.2.8 -p1
cd php-5.2.8/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../



  4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../


  5、修改php.ini文件
  手工修改:查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
  修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
  并在此行后增加以下几行,然后保存:
  extension = "memcache.so"
  extension = "pdo_mysql.so"
  extension = "imagick.so"

  再查找output_buffering = Off
  修改为output_buffering = On

  自动修改:若嫌手工修改麻烦,可执行以下shell命令,自动完成对php.ini文件的修改:
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini


  6、配置eAccelerator加速PHP:
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini

  按shift+g键跳到配置文件的最末尾,加上以下配置信息:
引用
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"


  修改配置文件:
vi /etc/sysctl.conf

  输入以下内容:
引用
kernel.shmmax = 134217728

  然后执行以下命令使配置生效:
/sbin/sysctl -p



  7、创建www用户和组,以及供blog.zyan.cc和www.zyan.cc两个虚拟主机使用的目录:
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www


  8、创建php-fpm配置文件(php-fpm是为PHP打的一个FastCGI管理补丁,可以平滑变更php.ini配置而无需重启php-cgi):
  在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件:
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf

  输入以下内容(如果您安装 Nginx + PHP 用于程序调试,请将以下的<value name="display_errors">0</value>改为<value name="display_errors">1</value>,以便显示PHP错误信息,否则,Nginx 会报状态为500的空白错误页):  9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程),用户为www:
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start

  注:/usr/local/webserver/php/sbin/php-fpm还有其他参数,包括:start|stop|quit|restart|reload|logrotate,修改php.ini后不重启php-cgi,重新加载配置文件使用reload。



  三、安装Nginx 0.7.51
  1、安装Nginx所需的pcre库:
tar zxvf pcre-7.8.tar.gz
cd pcre-7.8/
./configure
make && make install
cd ../


  2、安装Nginx
tar zxvf nginx-0.7.51.tar.gz
cd nginx-0.7.51/
./configure --user=www --group=www --prefix=/usr/local/webserver/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
cd ../


  3、创建Nginx日志目录
mkdir -p /data1/logs
chmod +w /data1/logs
chown -R www:www /data1/logs


  4、创建Nginx配置文件
  ①、在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件:
rm -f /usr/local/webserver/nginx/conf/nginx.conf
vi /usr/local/webserver/nginx/conf/nginx.conf

  输入以下内容:
引用
user  www www;

worker_processes 8;

error_log  /data1/logs/nginx_error.log  crit;

pid        /usr/local/webserver/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;

events
{
  use epoll;
  worker_connections 51200;
}

http
{
  include       mime.types;
  default_type  application/octet-stream;

  #charset  gb2312;
      
  server_names_hash_bucket_size 128;
  client_header_buffer_size 32k;
  large_client_header_buffers 4 32k;
  client_max_body_size 8m;
      
  sendfile on;
  tcp_nopush     on;

  keepalive_timeout 60;

  tcp_nodelay on;

  fastcgi_connect_timeout 300;
  fastcgi_send_timeout 300;
  fastcgi_read_timeout 300;
  fastcgi_buffer_size 64k;
  fastcgi_buffers 4 64k;
  fastcgi_busy_buffers_size 128k;
  fastcgi_temp_file_write_size 128k;

  gzip on;
  gzip_min_length  1k;
  gzip_buffers     4 16k;
  gzip_http_version 1.0;
  gzip_comp_level 2;
  gzip_types       text/plain application/x-javascript text/css application/xml;
  gzip_vary on;

  #limit_zone  crawler  $binary_remote_addr  10m;

  server
  {
    listen       80;
    server_name  blog.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/blog;

    #limit_conn   crawler  20;    
                            
    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }
    
    location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
    {
      expires      30d;
    }

    location ~ .*\.(js|css)?$
    {
      expires      1h;
    }    

    log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '
              '$status $body_bytes_sent "$http_referer" '
              '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/access.log  access;
      }

  server
  {
    listen       80;
    server_name  www.zyan.cc;
    index index.html index.htm index.php;
    root  /data0/htdocs/www;

    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }

    log_format  wwwlogs  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/wwwlogs.log  wwwlogs;
  }

  server
  {
    listen  80;
    server_name  status.blog.zyan.cc;

    location / {
    stub_status on;
    access_log   off;
    }
  }
}


  ②、在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件:
vi /usr/local/webserver/nginx/conf/fcgi.conf

  输入以下内容:
引用
fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;


  5、启动Nginx
ulimit -SHn 51200
/usr/local/webserver/nginx/sbin/nginx



  四、配置开机自动启动Nginx + PHP
vi /etc/rc.local

  在末尾增加以下内容:
引用
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx



  五、优化Linux内核参数
vi /etc/sysctl.conf

  在末尾增加以下内容:
引用
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000    65000


  使配置立即生效:
/sbin/sysctl -p



  六、在不停止Nginx服务的情况下平滑变更Nginx配置
  1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后,请执行以下命令检查配置文件是否正确:
/usr/local/webserver/nginx/sbin/nginx -t

  如果屏幕显示以下两行信息,说明配置文件正确:
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
  the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully


  2、这时,输入以下命令查看Nginx主进程号:
ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'

  屏幕显示的即为Nginx主进程号,例如:
  6302
  这时,执行以下命令即可使修改过的Nginx配置文件生效:
kill -HUP 6302

  或者无需这么麻烦,找到Nginx的Pid文件:
kill -HUP `cat /usr/local/webserver/nginx/nginx.pid`



  七、编写每天定时切割Nginx日志的脚本
  1、创建脚本/usr/local/webserver/nginx/sbin/cut_nginx_log.sh
vi /usr/local/webserver/nginx/sbin/cut_nginx_log.sh

  输入以下内容:
引用
#!/bin/bash
# This script run at 00:00

# The Nginx logs path
logs_path="/usr/local/webserver/nginx/logs/"

mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`


  2、设置crontab,每天凌晨00:00切割nginx访问日志
crontab -e

  输入以下内容:
引用
00 00 * * * /bin/bash  /usr/local/webserver/nginx/sbin/cut_nginx_log.sh




  本文若有小的修改,会第一时间在以下网址发布:
  http://blog.zyan.cc/post/366.htm



  附:文章修改历史

  ● [2008年08月29日] [Version 4.0] 撰写本文

  ● [2008年09月03日] [Version 4.1] 修改了nginx.conf文件有关gzip压缩的项,“gzip_http_version 1.1;”改为“gzip_http_version 1.0;”,增加一项“gzip_vary on;”,目的是为了让Nginx前端的Squid 2.5/2.6缓存服务器能够缓存经过gzip压缩的页面。另外,将nginx版本由0.7.13升级到最新的0.7.14。

  ● [2008年10月06日] [Version 4.2] 增加第七章──“编写每天定时切割Nginx日志的脚本”;升级Nginx版本到0.7.17;升级PHP FastCGI补丁到php-5.2.6-fpm-0.5.9.diff.gz;修改php-fpm.conf配置文件。

  ● [2008年10月26日] [Version 4.3] 升级Nginx版本到0.7.19。

  ● [2008年11月02日] [Version 4.4] 升级MySQL版本到5.1.29-rc。对文中涉及到的开源软件增加blog.zyan.cc下载点。

  ● [2008年11月11日] [Version 4.5] MySQL编译参数加上对InnoDB存储引擎的支持。

  ● [2008年11月14日] [Version 4.6] 解决在某些64位CentOS系统上,编译PHP时出现的libcrypto和libcurl无法找到的错误;升级Nginx版本到0.7.21。

  ● [2008年11月24日] [Version 4.7] 为PHP增加PDO_MYSQL扩展支持;升级PHP的Memcache扩展到2.2.4版本;升级PCRE版本到0.7.8;升级Nginx版本到0.7.22。

  ● [2008年12月12日] [Version 4.8] 升级Nginx版本到0.7.26;升级MySQL版本到5.1.30。

  ● [2008年12月17日] [Version 4.9] 编译PHP时的“sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile”和“make”两条语句改为“make ZEND_EXTRA_LIBS='-liconv'”;升级Nginx版本到0.7.27;升级PHP版本到5.2.8;升级PHP FastCGI补丁到php-5.2.8-fpm-0.5.10.diff.gz。

  ● [2008年12月23日] [Version 4.10] 编译PHP时增加此三项支持:--with-mhash --enable-pcntl --enable-sockets

  ● [2009年01月15日] [Version 4.11] 升级Nginx版本到0.7.30

  ● [2009年01月17日] [Version 4.12] 增加 RedHat AS4 系统环境通常情况下缺少的支持包安装。

  ● [2009年04月02日] [Version 4.13] 升级Nginx版本到0.7.47;升级MySQL版本到5.1.33;升级PHP的Memcache扩展到2.2.5版本;升级libiconv版本到1.13;升级mcrypt版本到2.6.8;升级mhash版本到0.9.9.9;。

  ● [2009年04月14日] [Version 4.13] 升级Nginx版本到0.7.51;为PHP增加ldap支持;为PHP增加ImageMagick支持。

  (全文完)




技术大类 » Web服务器 | 评论(330) | 引用(0) | 阅读(665484)
wwek Homepage
2008-12-15 23:02
安装 php configure时,过不了。 报错 configure: error: png.h not found.  
rpm -qa | grep libpng
yum -y install libpng
更新了 libpng库 问题依旧。
kl369.com
2008-12-18 10:26
好像没有配置mysql开机自启动?
peter Email Homepage
2008-12-19 04:26
才看到这么好的文章,收藏收藏,下周本地测试~
feike
2008-12-19 10:14
Nginx 安装好后,工作正常
但有一个小问题 ,为什么我telnet端口时老是报400错误呢?

<html>
<head><title>400 Bad Request</title></head>
<body bgcolor="white">
<center><h1>400 Bad Request</h1></center>
<hr><center>nginx/0.7.27</center>
</body>
</html>
fish
2008-12-21 13:30
呵呵,不知道在Freebsd下性能如何,看到yahoo好像也将Freebsd逐渐换成RED了,不过我还是喜欢BSD系列。
granite countertops Email Homepage
2008-12-23 08:27
请教个问题;
我配置了两个虚拟主机,为什么访问总显示每一个呢?跟Apache里没有加NaveVirtualHost 效果很像。granite countertops
过路人
2008-12-23 12:11
我在使用Nginx时,为什么我直接在IE里打开一个文件不会有问题,但用
<iframe width=420 height=330 frameborder=0 scrolling=auto src=uploadpic.php></iframe>
调用文件里,总是提示找不到服务器。后台的nginx logs.log提示下面的错误:
192.168.1.104 - - [23/Dec/2008:20:01:37 +0800] "GET /uploadpic.php HTTP/1.1" 200 305 "http://xx.com/test2.php" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; CIBA)" -
这是什么原因呢?我是
test2.php只有<iframe width=420 height=330 frameborder=0 scrolling=auto src=uploadpic.php></iframe>
而 uploadpic.php中也只放了一句this is test。
请问是什么原因呢?
请教
2008-12-24 10:43
请问NGINX里,允许有这样的链接吗?http://cy.abc.cn/index.php/article/1697,我想把index.php去掉,改成http://cy.abc.cn/article/1697,这种好像不可以!
rewrite是这样写的   location / {

       if (!-e $request_filename) {

          rewrite ^/(.*)$ index.php/$1 last;

       }

  }
结果访问了是404,nginx最开始的http://cy.abc.cn/index.php/article/1697就没有访问成功,所以说REWRITE写对了,也无济于事,我弄了好几天了,请您帮帮忙,到底是哪的问题?
cfans Email Homepage
2008-12-25 13:15
Nginx+FastCGI经常会出现502 Bad Gateway错误,你的增加fastcgi_connect_timeout 等三个参数值的方法效果也不好
经过长时间反复测试,发现静态页面不会出现该错误,只有在运行动态页面或者长时间操作数据库时才会出现这个错误,重启Nginx+FastCGI后即可解决,但是几分钟到几个小时后又会出现该错误。
经过测试,发现修改php-fpm.conf文件中 request_terminate_timeout即FastCGI脚本运行时间可以有效改善该问题,增加CGI进程数也可以改善该问题,但占资源太多效率太低。
还可以修改
max_execution_time
<value name="request_terminate_timeout">0s</value>
<value name="process_control_timeout">5s</value>
等值对FastCGI进行优化,所以现502的错误其实不是nginx的问题
php-cgi进程数不够用、php执行时间长、或者是php-cgi进程死掉,都会出现502错误

同时还想对APMServ提点建议,随着APMServ逐渐完善,将她用于生产环境的越来越多,但又希望将最新的的技术、组件应用于APMServ,建议将她开发为两个版本。
即一个stable版一个普通release版,stable不急于集成最新的软件,而是使用最成熟的技术,尽量少的bug;release版则使用各种最新技术,让有兴趣的朋友帮助测试,逐步完善最终成为stable版。
另希望在可能的情况下开个讨论区,方便大家把发现的问题及时反馈上来,相互交流。
cfans Email Homepage
2008-12-25 13:34
还有一个问题,不知算不算Bug,就是如果Nginx配置文件中ServerNanme一项写成localhost,在非本地访问动态页面的情况下,链接并不能自动转换成域名或IP地址,比如我使用PhpCMS建站,首页的图片广告的链接直接显示成http://localhost/ads/123.php?id=1,造成无法正常显示,但指定ServerName为具体名称后就可以了。
smarteng Email Homepage
2008-12-26 10:01
"9、启动php-cgi进程,监听127.0.0.1的9000端口,进程数为200(如果服务器内存小于3GB,可以只开启64个进程),用户为www:"

我看你这个php-cgi的配置文件中的进程数是128,不是200吧,不太清楚配置php-cgi,
不知道这个“如果服务器内存小于3GB,可以只开启64个进程” 在哪里设置?
#  Sets the limit on the number of simultaneous requests that will be served.  
#         Equivalent to Apache MaxClients directive.  
#         Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi  
#         Used with any pm_style.  
#         <value name="max_children">64</value>  
是这样吧?
Hua Email
2008-12-27 22:31
你的网站提供的libmcrypt下载有问题,不能make,只有从第一个地址下载的才行
qingjiao
2008-12-27 23:47
[2008年12月17日] [Version 4.9] 编译PHP时的“sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile”和“make”两条语句改为“make ZEND_EXTRA_LIBS='-liconv'”;升级Nginx版本到0.7.27;升级PHP版本到5.2.8;升级PHP FastCGI补丁到php-5.2.8-fpm-0.5.10.diff.gz。

请教一下,现在是nginx0.6.32+php5.2.6+mysql5.1.26rc,如果要升级为最新版本,怎么办?都要全部重新编译吗?原来编译的要先删除吗?请指教。多谢。
张宴 回复于 2009-1-1 08:28
不用先删除,直接重新编译即可。
阿泽
2008-12-28 21:54
mysql 启动不成功,怎么办!
wjlhh
2008-12-31 14:01
张兄,我按照你的最新更新mysql出现错误:
081231 14:01:09 mysqld_safe Logging to '/usr/local/webserver/mysql/var/localhost.localdomain.err'.
081231 14:01:09 mysqld_safe Starting mysqld daemon with databases from /usr/local/webserver/mysql/var
081231 14:01:09 mysqld_safe mysqld from pid file /usr/local/webserver/mysql/var/localhost.localdomain.pid ended
望指教,谢谢。
张宴 回复于 2009-1-1 08:28
目录属组改为mysql:mysql
无影
2009-1-2 23:43
张大哥,我照你的方法来回安装了  十几次 最后(访问php网页)都是出现

No input file specified.

我是新手,实在不知道怎么找错误的原因,找百度和谷歌的方法修改都没有用了

请求找错误的方法或者解决方法

我是在虚拟机中安装的,安装使用CentOS5.0 后来yum升级到 5.2了
freeke Email Homepage
2009-1-5 18:01
楼上的兄弟,请在nginx.conf中添加以下一行:
fastcgi_intercept_errors on;
GAOAOG
2009-1-6 11:17
高手啊
1212
2009-1-6 16:19
centos5.1 64位出现如下错误.
[root@load nginx]# /usr/local/webserver/php/sbin/php-fpm start
Starting php_fpm Jan 06 16:08:30.402483 [ERROR] fpm_unix_conf_wp(), line 124: please specify user and group other than root, pool 'default'
................................... failed
随便谁
2009-1-11 18:45
在编译mcrypt时若出现You need at least libmhash 0.8.15 to compile this program可以这样configureLD_LIBRARY_PATH=/usr/local/lib ./configure
分页: 7/17 第一页 上页 2 3 4 5 6 7 8 9 10 11 下页 最后页
发表评论
表情
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
emotemotemotemotemot
打开HTML
打开UBB
打开表情
隐藏
记住我
昵称   密码   游客无需密码
网址   电邮   [注册]